Forging forming -- English · 2023年7月12日 0

Lubrication properties and lubrication measures of agricultural machinery aluminum forgings

The lubrication performance of agricultural machinery aluminum forgings refers to the friction and wear between it and other parts during the working process. Aluminum forgings usually have high hardness and corrosion resistance, but relatively poor lubrication performance. In order to improve the lubrication performance, the following lubrication measures can be taken:

  1. Choose the right lubricant: According to the working conditions and requirements of agricultural aluminum forgings, choose the right lubricant. In general, lubricants, greases and solid lubricants can be used for the lubrication of aluminum forgings in agricultural machinery. For high-speed moving parts, you can choose a lubricant with lower viscosity, and for parts with larger loads, you can choose a lubricant with higher viscosity.
  2. Regular lubrication maintenance: regular lubrication maintenance of agricultural machinery aluminum forgings to ensure adequate supply of lubricants. The lubrication cycle can be determined according to the specific situation, but be careful not to over-lubricate, so as not to cause waste and environmental pollution.
  3. Clean the surface: Before lubrication, ensure that the surface of agricultural machinery aluminum forgings is clean. Clean the surface with a cleaner to remove dirt and impurities to ensure that the lubricant is fully attached to the surface.
  4. Control lubricant temperature: the temperature of lubricant is very important for lubrication performance. Too high a temperature will lead to the failure of the lubricant, too low a temperature will affect the fluidity of the lubricant. Therefore, it is necessary to control the temperature of the lubricant within a suitable range, which can be achieved by using an oil cooler or heater.
  5. Check the lubrication status regularly: check the lubrication status of agricultural machinery aluminum forgings regularly, including the supply of lubricants and the formation of lubricating films. If poor lubrication or insufficient lubricant supply is found, appropriate measures should be taken in time to repair or replace the lubricant.

In short, by choosing the right lubricant, regular lubrication maintenance, cleaning the surface, controlling the lubricant temperature and regularly checking the lubrication state, the lubrication performance of agricultural machinery aluminum forgings can be improved and its service life can be extended.